1. GENERAL SPECIFICATIONS :
A : Generator
Frequency -- 0.5Hz ~ 3MHz with 5-digit LED display, Max. resolution 0.001Hz in 6 steps.
Waveform output -- Sine, Square, Triangle, Ramp, Positive Pulse and Negative Pulse; 6 waveforms total.
Stability -- 0.1% ~ 15 minutes after power-on.
0.2% ~ 24hrs after power-on.

B : Counter
Display -- 5 digits 0.36" red LED.
Max. Resolution -- 0.001Hz.
Display unit -- Hz / KHz Automatically controlled by CPU.

C : Common Specification
Limits of operation -- 0oC~40oC,10%~80%R.H.
Storage Environment -- -20oC~70oC,0%~90%R.H.
Power consumption -- 25W.
Power source --
AC 115V (+/-10%)50/60Hz,FUSE : 600mA
AC 230V (+/-10% )50/60Hz, FUSE : 300mA
Ventilation -- DC 12V / 100mA Fan.
Dimensions -- 275 x 90 x 300mm
Weight -- 2.5Kg Net.
Accessory -- Power cord, operating manual.

2. RAMP WAVE :
Frequency : 0.5Hz ~ 2.5MHz, 5-digit LED display, Max. resolution 0.001Hz, 6 steps selected by rotary switch.
Symmetry : 80% (Rise wave) to 20% (Fall wave), < 5%, 1Hz ~ 100KHz.
Rise Wave Linearity : < 2%, 1Hz ~ 100KHz.

3. TRIANGLE WAVE :
Frequency : 0.5Hz ~ 3MHz, 5-digit LED display, Max. resolution 0.001Hz
Symmetry : 50% (Rise wave) to 50% (Fall wave), < 2%, 1Hz ~ 100KHz.

4. SINE WAVE :
Frequency : 0.5Hz ~ 3MHz, 5-digit LED display, Max. resolution 0.001Hz.
Distortion : < 2%, 1Hz ~ 100KHz.
Harmonic Ratio : < 30dB, 100KHz ~ 3MHz
Frequency Response :
< 0.1dB, up to 100KHz.
< 1dB, 100KHz to 3MHz.

5. SQUARE WAVE :
Frequency : 0.5Hz ~ 3MHz, 5-digit LED display, Max. resolution 0.001Hz.
Symmetry : 50% (Positive half) to 50% (Negative half). < 2%, 1Hz ~ 100KHz
Rise Time : < 60ns.

6. POSITIVE PULSE :
Frequency : 0.5Hz ~ 2.5MHz, 5-digit LED display.
Width : 0.4sec ~ 100ns, continuous adjustment.
Symmetry : 20% to 80%, < 5%, 1Hz ~ 100KHz.
Rise Time : < 60ns.

7. NEGATIVE PULSE :
Frequency : 0.5Hz ~ 2.5MHz, 5-digit LED display, Max. resolution 0.001Hz.
Width : 0.4sec ~ 100ns.
Symmetry : 80% to 20%, < 5%, 1Hz ~ 100KHz.
Fall Time : < 60ns.

8. MAIN OUTPUT :
Output Impedance : 50W, < 2% Accuracy
Max. Output : 20Vp-p (No-load),+/-1V
10Vp-p (50 Omh load)+/-0.5V
Min. Output : 0.1Vp-p (No-load), or 0.05Vp-p (50 Omh load)
Attenuator : One -20dB Attenuator, < 2% Accuracy

9. SYNCHRONOUS OUTPUT :
Output Impedance : 50 Omh, < 2%, Accuracy.
Output Level : TTL level, > 3Vp-p fixed amplitude.
Fan Out : > 20
Rise Time : < 30nS.

10. VCF INPUT :
Input Voltage : 0 ~ 10V
Input Frequency : DC ~ 1KHz
Input Frequency Variance : 1:1 to 1:1000

11. SWEEP SYNCHRONOUS OUTPUT :
Output Impedance : 1KHz, < 2%
Output Waveform : Linear or Log sweep ramp wave.
Output Amplitude : 10Vp-p (No load) or 5Vp-p (1K Omh load)
Output Frequency : 0.2Hz ~ 100Hz continuous adjustment.

12. SWEEP GENERATOR :
Sweep Form : Linear or Log switchable.
Sweep Speed : 5sec ~ 10ms, continuous adjustment.
Sweep Width : 1:1 ~ 1:100

13. COUNTER :
Display : 5 digits, 0.36" red LED display.
Max. Resolution : 0.001Hz
Display unit : Hz / KHz, Auto range.
Time base : 20MHz
Temperature coefficient : < 10ppm / oC
Accuracy : < 0.002%
Power Supply : +5V, 160mA

Internal Counter :
Range : Auto range with 4 resolutions, 0.001Hz / 0.01Hz / 0.001KHz / 0.01KHz, Auto control by CPU.
Display : 0.500Hz ~ 3000.0KHz, Auto select by CPU.
Gate time : Variable, 0.25sec ~ 2sec, Auto - setting.
Min. display digits : 4 digits.

External Counter :
Max. Input Voltage : < 250Vrms
Input Impedance : 1M Omh, < 2%
Input Frequency : 0.2Hz ~ 60MHz
Attenuator : *20 (-26dB) Attenuator
Coupling : AC (HF) -- For >100KHz frequency.
DC (LF) -- With 100KHz filter, for frequency <100KHz
Range : The same as internal counter.
Min. display digits : 4 digits.
Gate Time : 0.25sec ~ 10sec, Auto - setting, depends on the input frequency
Sensitivity : < 30mVrms (1MHz)

• User Manual PDF - 2 MiB

Pintek BP-251 BNC to Alligator Cable
Power Cord
Function Generator Operation Manual